Setting New Standards

Low Cost Directional Couplers

TAYLOR MICROWAVE, INC.

Directional Couplers

CPL Series • Low-Cost Stripline Directional Couplers

0.20–18 GHz Product Family
6, 10, 20 & 30 dB Coupling
50 Ω

CPL Series Product Photo
Insert your directional coupler photo here.

Taylor Microwave CPL Series

Ordering Information

Specify the model number, frequency band, coupling value and required power rating when requesting a quotation.

Stripline Construction. Repeatable Performance.

Taylor Microwave CPL Series directional couplers provide a coupled sample of an RF signal for measurement and monitoring. Select from available frequency bands and standard coupling values to match your application.

General Specifications
Product family range 0.20 to 18 GHz; band dependent
Nominal impedance 50 Ω
Standard coupling 6, 10, 20 or 30 dB
Standard connectors SMA female
Power rating 50 W standard listed models; up to 100 W CW available
Operating temperature −55°C to +85°C
Construction Stripline

Features

  • Low-cost stripline construction
  • Repeatable RF performance
  • Multiple frequency bands
  • Four standard coupling values

Custom Options

  • Power handling up to 100 W CW
  • Alternative connectors and outlines
  • Higher isolation available
  • Custom designs — contact factory

Models & Electrical Specifications

Compare frequency range, coupling, frequency sensitivity, insertion loss, directivity, VSWR and power rating in the model table below.


P/N
(1)
Frequency
Range
(GHz)
(2)
Coupling
(dB)
Freq.
Sensitivity
(db)
Insertion
Loss
Above Coupling
Loss (dB)
Directivity
(dB Min.)
Max.
Input/Out
VSWR
Max/
Avg.
Power
(watt Max.)
CPL-0510-60.5-16 ± 1.50
± 0.750.20201.250
CPL-0510-100.5-110 ± 1.75± 0.750.20201.250
CPL-0510-200.5-120 ± 1.75± 0.750.20201.250
CPL-0510-300.5-130 ± 1.75± 0.750.20201.250
CPL-1020-61-26 ± 1.50± 0.750.20201.1550
CPL-1020-101-210 ± 1.75± 0.750.20201.150
CPL-1020-20
1-220 ± 1.75
± 0.750.20201.150
CPL-1020-301-230 ± 1.75± 0.750.20201.150
CPL-2652-62.6-5.26 ± 1.50± 0.750.25
171.3550
CPL-2652-10
2.6-5.210 ± 1.75± 0.750.25171.3550
CPL-2652-202.6-5.220 ± 1.75± 0.750.25171.3550
CPL-2652-302.6-5.230 ± 1.75± 0.750.25171.3550
CPL-2040-62-46 ± 1.50± 0.75
0.25181.250
CPL-2040-10
2-410 ± 1.75± 0.750.25181.250
CPL-2040-202-420 ± 1.75± 0.750.20181.250
CPL-2040-302-430 ± 1.75± 0.750.20151.250
CPL-4080-64-86 ± 1.50± 0.75
0.35171.450
CPL-4080-104-810 ± 1.75
± 0.750.35171.450
CPL-4080-204-820 ± 1.75± 0.750.35171.450
CPL-4080-304-830 ± 1.75± 0.750.35171.450
CPL-7012-67-126 ± 1.50± 0.50
0.35151.4550
CPL-7012-107-1210 ± 1.50
± 0.500.35151.4550
CPL-7012-207-1220 ± 1.50± 0.500.35151.4550
CPL-7012-307-1230 ± 1.50± 0.500.35151.4550
CPL-7516-67.5-166 ± 1.50± 0.75
0.60111.550
CPL-7516-10
7.5-1610 ± 1.75± 0.750.60111.550
CPL-7516-20
7.5-1620 ± 1.75± 0.750.60141.550
CPL-7516-307.5-1630 ± 1.75± 0.750.60141.550
CPL-1218-612-186 ± 1.50± 0.500.75101.550
CPL-1218-1012-1810 ± 1.75
± 0.500.75101.550
CPL-1218-20
12-1820 ± 1.75± 0.500.75101.550
CPL-1218-3012-1830 ± 1.75± 0.500.75101.550

Insertion loss is specified above coupling loss. Electrical specifications vary by model. Confirm the required frequency band and power rating when ordering.

Outline Drawing & Dimensions


Taylor Microwave CPL Series directional coupler outline drawing

Click the drawing to view the full-size image. Dimensions below are in inches.

Outline Frequency (GHz) A B C D
1 0.5–1 3.250 2.250 — 1.000
2 1–2 2.250 1.500 — 0.750
3 4–18 1.250 — 0.625 —

For other frequency bands or custom configurations, contact Taylor Microwave to confirm the applicable outline.

Need a Different Configuration?

Send us your frequency range, coupling value, connector preference and power requirements.

sales@taylormw.com