High Power Gysel Power Dividers
High Power Gysel Power Dividers
High-Performance RF & Microwave Power Division
High-Power Gysel Power Dividers
Taylor Microwave high-power Gysel power dividers are designed for RF and microwave systems requiring efficient power division, good isolation, low insertion loss, and high power handling.
The Gysel configuration provides a practical solution for high-power applications while maintaining excellent electrical performance.
Features
High Power
Gysel architecture is well suited for high-power RF and microwave applications.
Low Loss
Designed for low insertion loss and efficient power distribution.
Good Isolation
Provides isolation between output ports for demanding system applications.
Custom Designs
Custom frequency ranges, power levels, and connector configurations are available.
PD2G SMA Series
2-Way Gysel Power Divider
250 MHz – 20 GHz
Typical Applications
- High-power RF systems
- Microwave test equipment
- Signal distribution systems
- Power combining and splitting
- Communication systems
- Laboratory instrumentation
- Custom microwave assemblies
Electrical Specifications
| Part Number | Frequency Range (GHz) |
Insertion Loss Max. (dB) |
Isolation Min. (dB) |
VSWR IN/OUT Max. |
Input Power Peak / Avg. (W) |
Phase Balance ±° Max. |
Amplitude Balance ±dB |
|---|---|---|---|---|---|---|---|
| PD2G-9510 | 9.5 – 10 | 0.25 | 20 | 1.3 / 1.2 | 500 / 50 | 1 | 0.20 |
|
PD2G-XXXX — Custom Frequency Contact Taylor Microwave for user-defined frequency bands and optimized specifications. |
|||||||
Gysel Power Divider Design
Gysel power dividers are designed to divide an RF input signal into multiple output signals while maintaining controlled impedance and isolation between the output ports. The architecture is particularly useful where high power handling and reliable microwave performance are required.
Taylor Microwave can develop custom Gysel power dividers for specific frequency ranges, power requirements, electrical performance, and mechanical configurations.
Custom High-Power Options
Custom frequency bands available to meet system requirements.
High-power configurations can be developed for specific RF power levels.
Connector configurations can be selected for the application.
Custom housings and mechanical configurations are available.
Connector Options
SMA • BNC • TNC • Type N • F
Connector selection depends on frequency, power level, and mechanical requirements.
Notes
- Power ratings depend on frequency, duty cycle, temperature, and load VSWR.
- Power rating shown is for a load VSWR better than 1.20:1.
- Custom frequency bands and optimized specifications are available.
- Contact Taylor Microwave for high-power requirements outside the standard configuration.
Need a Custom Gysel Power Divider?
Tell us your frequency range, power level, number of outputs, connector type, and mechanical requirements.