4 Way Power Dividers
4 Way Power Dividers
PD4 SMA Series
4 Way Power Dividers
Taylor Microwave 4 Way Power Dividers are low cost high performance stripline
components designed for a wide range of RF and microwave applications.
State-of-the-art CAD design allows Taylor Microwave to meet a wide variety of
electrical and mechanical requirements without high development costs.
Custom frequency bands and optimized specifications are available.
Features
Wide Frequency Range
1 MHz to 40 GHz
Low Loss
Low insertion loss for efficient RF power distribution
Repeatable Performance
Consistent electrical performance from unit to unit
Low Cost
Cost-effective stripline construction
Description
TMI’s 4 Way Power Dividers are low cost high performance stripline components
designed using state-of-the-art CAD systems.
The PD4 Series divides an RF input signal into four output signals with controlled
amplitude and phase balance. The design can be optimized for frequency range
insertion loss isolation VSWR power handling and mechanical configuration.
Custom frequency bands and optimized specifications are available for special
applications.
RF and Microwave Power Distribution
Taylor Microwave power dividers are available in a variety of configurations
for signal distribution measurement systems test equipment communications
systems and other RF and microwave applications.
Connector options include SMA and other connector configurations are available
for special requirements.
Electrical Specifications
| P/N |
Frequency Range (GHz) |
Insertion Loss Max. (dB) |
Isolation Min. (dB) |
VSWR IN/OUT Max. |
Input Power Max. (W) |
Phase Balance ±° Max. |
Amplitude Balance ± dB |
|---|---|---|---|---|---|---|---|
| PD4-05100 | 0.5–1.0 | 0.50 | 22 | 1.3 / 1.15 | 30 | 2 | 0.20 |
| PD4-12000 | 1.0–2.0 | 0.50 | 22 | 1.3 / 1.2 | 30 | 2 | 0.20 |
| PD4-24000 | 2.0–4.0 | 0.50 | 20 | 1.3 / 1.2 | 30 | 2 | 0.20 |
| PD4-48000 | 4.0–8.0 | 0.75 | 20 | 1.4 / 1.2 | 30 | 2 | 0.20 |
| PD4-81200 | 8.0–12.0 | 0.75 | 20 | 1.5 / 1.3 | 30 | 2 | 0.20 |
| PD4-12180 | 12.0–18.0 | 1.3 | 20 | 1.6 / 1.5 | 30 | 2 | 0.20 |
| PD4-07530 | 0.75–3.0 | 0.75 | 20 | 1.4 / 1.3 | 30 | 2 | 0.20 |
| PD4-05200 | 0.5–2.0 | 0.60 | 20 | 1.4 / 1.3 | 30 | 2 | 0.20 |
| PD4-14000 | 1.0–4.0 | 0.60 | 20 | 1.4 / 1.3 | 30 | 2 | 0.20 |
| PD4-28000 | 2.0–8.0 | 0.80 | 20 | 1.5 / 1.3 | 30 | 5 | 0.20 |
| PD4-31200 | 3.0–12.0 | 1.2 | 20 | 1.6 / 1.4 | 30 | 2 | 0.20 |
| PD4-41800 | 4.0–18.0 | 1.4 | 20 | 1.6 / 1.5 | 30 | 2 | 0.20 |
| PD4-61800 | 6.0–18.0 | 1.4 | 20 | 1.6 / 1.5 | 30 | 2 | 0.20 |
| PD4-11300 | 1.0–13.0 | 1.4 | 20 | 1.6 / 1.5 | 30 | 2 | 0.20 |
| PD4-21800 | 2.0–18.0 | 1.8 | 18 | 1.6 / 1.5 | 30 | 2 | 0.20 |
| PD4S-12400 | 12–40.0 | 1.0 | 15 | 1.9 / 1.9 | 10 | 5 | 0.50 |
Additional Options
- Bandwidths available up to 36:1 ratio
- Higher isolation available
- Up to 200 W CW available
- Custom frequency bands available
- Optimized specifications available
- BNC connectors available
- TNC connectors available
- N connectors available
- F connectors available
Power Rating
Power rating is specified for load VSWR better than 1.20:1.
Custom 4 Way Power Dividers
Taylor Microwave can customize frequency range insertion loss isolation
VSWR power handling phase balance amplitude balance connectors and
mechanical configuration to meet your requirements.
Contact Taylor Microwave for custom frequency bands and optimized specifications.
Free Ground Shipping on Orders over $250 — USA Only