DC Blocks
DC Blocks
Broadband RF DC Blocks for isolating DC voltage while passing RF signals.
RF DC Blocks
Taylor Microwave DC Blocks are designed to provide DC isolation while
allowing RF and microwave signals to pass through the device.
The DCB-A01 provides broadband operation from 100 MHz to 18 GHz,
with high voltage isolation and low insertion loss in a compact RF
package.
Custom designs are available for specific frequency ranges,
voltage requirements, connector configurations, and other application
requirements.
Features
Electrical Specifications
| Model | Frequency Range |
Insertion Loss Max. |
Voltage Max. |
VSWR Max. |
Input Power Max. |
|---|---|---|---|---|---|
| DCB-A01 | 100 MHz–18 GHz | 1.5 dB | 2 kV | 1.5 | 20 W |
General Specifications
| Impedance | 50 Ω Nominal |
| Temperature | −55 to +85°C |
| Finish | Grey Paint |
Custom Designs
Taylor Microwave can provide custom DC Block designs to meet
application-specific requirements.
- Custom frequency ranges
- Higher voltage requirements
- Custom RF power levels
- Custom connector configurations
- Other mechanical and electrical requirements
RF and Microwave Applications
DC Blocks are useful wherever DC isolation is required in an RF or
microwave signal path. The DCB-A01 provides broadband operation with
a 2 kV maximum voltage rating and 20 W maximum input power rating.
Need a Custom DC Block?
Contact Taylor Microwave for custom frequency, voltage, power,
connector, or mechanical requirements.
Free Ground Shipping on Orders over $250 — USA Only